Product Overview
Scotchman CPO-350 Cold Saw - Manual cut - manual vise pictured.
HT or LT - 3 Phase Motor. SS - 1 Phase Motor.
HT speeds are 44/88 RPM (High Turn)
LT speeds are 22/44 RPM (Low Turn)
VS speeds are 11 to 177 RPM (Variable Speed)
SS speed is 44 RPM - Single phase machines are an additional $200. *Contact us for other machine options* - Power down feed and Power clamping vise.
Option Power Vise (PK) and Power Down feed (PD)
Scotchman Industries powerful American-made CPO 350 Circular Cold Saw is the perfect machine for any fabrication shop. This dependable saw features a double clamping and self-centering vise for maximum hold and provides burr-free, high quality, volume parts. It has 180 degree mitering ability and a miter-locking device which automatically stops at 45 degrees left, 90 degrees straight, and 45 degrees right, giving it the ability to slot and notch. Additional machine features include a chip drawer, a double reduction gearbox, a two-speed motor which utilizes up to a 350mm diameter blade giving it a 4-7/8" OD round capacity. This machine is built with dependability and versatility in mind, with the quality you expect from a Scotchman. Always backed by their outstanding 3-Year Warranty!
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 45 degrees Left and 45 degrees Right
Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
Chip Drawer
7 Gallon Coolant Tank with Pump
One 12-1/2" Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: Three Years on Parts
Made in USA
Frequently Asked Questions
It’s built for accurate, burr-free metal cutting where repeatability and clean finishes matter. The rigid clamping system helps hold stock securely for consistent cuts in a fabrication environment. As a metal cutting cold saw, it’s commonly used for producing high-quality parts in volume with minimal secondary deburring.
Choose LT or HT if you want two fixed cutting speeds, and choose VS if you need a broader variable-speed range to match different metals and wall thicknesses. The SS option is single-phase, while LT/HT are typically three-phase, so shop power availability can determine what’s practical. Matching a Scotchman cold saw speed range to your most common materials helps improve blade life and cut quality.
Cold saw blades are available through industrial tooling suppliers and authorized channels that support Scotchman Industries equipment. Confirm blade diameter compatibility (up to 350 mm) along with the correct arbor size and tooth count for your material type. Using the right cold cut saw blade geometry helps maintain finish quality and reduces heat buildup compared with many other cold saws.
